JH-8 back to the winch manufacturer 7.5KW mine winch Heng Wang Group in Shandong Confucius and Mencius, Canal Capital city of Jining charm! Remember: 13506389 1220537-28823 38 -, 7.5KW winch - Description JH-8 winch characteristics and uses: for coal mine caving prop, especially for vertical groove seams, thin traction power relocation and Coal Seam, the thick seam mining face less stressful roof integrated mining equipment installed, can do haul, move the chute, conveyor belts move the traction winch nose and other auxiliary work. Winch motors, electrical equipment has proof performance for containing methane and coal dust and the ambient temperature does not exceed + 35 ℃ mines. Two, 7.5KW winch - Technical Specifications: Model: JH-8 (7.5KW) rope pull (KN): 80 Rope speed (m / s): 0.1 rope capacity rope diameter (mm): Φ15.5 rope length (m): 80 drum size (diameter × width) (mm): Φ280 × 230 total reduction ratio: 181.17 Dimensions (L × W × H) (mm): 1550 × 530 × 708 JH-8 back to the winch weight (including motor) (kg): 670 Motor Specifications Type: YB160M-6 power (KW): 7.5 rpm (r / min): 970 Voltage (V): 380/660 explosion-proof electrical equipment magnetic starter: QC83-80N Explosion Control buttons: LA81-3 JH series winch flameproof properties have major prop for the coal mine caving use. Especially for thin seam coal face and tilt, as well as in a variety of mining work surface sink metal pillar recovery or waste rock bottom card junction. Also be used as shift groove, moving belt conveyor top auxiliary traction work. Third, Heng Wang mining manufacturers and Contact: Contact: Sharon Sales Hotline: 13506 389122 QQ:. 1809 31736 0 Tel: 0537-2882338 Fax: 8 6-0537-2585538